My shopping cart
Your cart is currently empty.
Continue ShoppingRelated Products
The SLXD4QDAN+ Quad Channel Receiver with Dante Audio connectivity is the best choice for streamlining SLX-D digital wireless performance into a space-saving footprint. Featuring expanded capabilities for confident speech presentation and vocal performance—from lecture halls to live entertainment.
FEATURES
-
• Four channels in one rack space
• Wide 138 MHz tuning range
• 32 available channels per frequency band (region dependent)
• Transparent 24-bit digital audio
• 118 dB dynamic range
• Audio Summing matches receiver output to available mixer channels (4, 3, 2 or 1)
• 4 XLR and 4 1/4" outputs and 2 local ethernet connections
• Dante Audio Networking, carried on single Ethernet cable
• RF Cascade creates an 8-channel system by linking two SLXD4Q+ together; no other accessories required
• Bias Voltage power supply management
• Digital predictive switching diversity
• Easy pairing of transmitters and receivers over IR scan and sync
• Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
• Rugged metal construction
SPECIFICATIONS
-
• Dimensions: 42 x 393 x 152 mm (1.65 x 15.47 x 5.98 in.), H x W x D
• Weight: 1750 g, without antennas
• Housing: Galvanized Steel
• Power Requirements: 15 V @ 1.03 A with Dante
RF Input:
• Spurious Rejection: >75 dB, typical
• Connector Type: BNC
• Impedance: 50 Ω
• Bias Voltage: 15 V DC, 150 mA maximum, per antenna (switchable on-off)
Audio Output:
• Audio Frequency Response: 20 Hz– 20 kHz (+1, -2 dB)
• Gain Adjustment Range: -18 to +42 dB in 1 dB steps
• Configuration:
• 1/4" (6.35 mm): Balanced (Tip = audio +, Ring = audio -, Sleeve = ground)
• XLR: Balanced (1 = ground, 2 = audio +, 3 = audio −)
• Impedance:
• 1/4" (6.35 mm): 1.1 kΩ (550 Ω Unbalanced)
• XLR (line): 500 Ω (250 Ω Unbalanced)
• XLR (mic): 150 Ω
• Full Scale Output:
• 1/4" (6.35 mm): +12 dBV Unbalanced, +18 dBV Balanced
• XLR: LINE setting = +18 dBV, MIC setting = -12 dBV
• Mic/Line Switch: 30 dB pad
• Phantom Power Protection:
• 1/4" (6.35 mm): Yes
• XLR: Yes
Cascade Output:
• Connector Type: BNC
*Note: For connection of one additional receiver in the same band
• Configuration: Unbalanced
• Impedance: 50 Ω
• Insertion Gain: 0–2 dB, typical
Networking:
• Network Interface: 10/100 Mbps, 1 Gbps, Dante Digital Audio
• Network Addressing Capability: DHCP or Manual IP address
• Maximum Cable Length: 100 m (328 ft)
CONTENTS
-
(1) Shure SLXD4QDAN+ Quad Channel Receiver with Dante Audio
(1) Rack Mounting Hardware
(2) Brackets
(2) 1/4 Wave Antennas
(1) PS60 Power Supply
(1) Ethernet Cable
BYFP ipCases
Microphone
Video
DJ
Speaker
Lighting
Mixer
Control
Utility
Sign up for our newsletter
Sign up for our mailing list to receive new product alerts, special offers, and coupon codes.
© 2025 avBYFP | Powered by Shopify